ACE FMC-75-HYD Polypropylene Hydraulic Motor Driven Centrifugal Pump, Suction 1” Discharge 3/4”

ACE FMC-75-HYD Polypropylene Hydraulic Motor Driven Centrifugal Pump, Suction 1” Discharge 3/4”

Product Description

Ace developed the first hydraulic motor driven pump at the request of John Deere in 1969. Many of the original pumps are still operating today after more than 30 years of service.  The centrifugal pump design provides good resistance to abrasive solutions and extra flow for agitation. The advantages of the hydraulic motor driven pump are mounting versatility, customized performance, and ease of maintenance.

Product Features

The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input.
Recommended for:

• Pressure Compensating Closed Center Systems
• Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve bypass.

The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.
Recommended for:

• Pressure Compensating Closed Center Systems
• Load Sensing Closed Center Systems
• Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass