Select your options below…

{{ option.description }}
"{{ option.noLongerAvailable }}" is no longer a valid option. Please choose from the current set of options.
Need help? Call one of our pump experts at 1-802-255-4003. We’re open 8:00 am to 5:00 pm .
Starting Price: $293.00
Selected Options: + ${{ calcAdditionalCost | formatCurrency }}
${{ calcCost | formatCurrency }} per {{ calcQuantity }} per {{ boxQuantity }}
Configured Part Number: {{ calcPartNumber }}
Alternate Part Numbers: {{pn}}
{{ calcAvailability }}

Send details on your pump application.
A pump application specialist will contact you within 24 hours with information on the best pumps to suit your application.  If you require urgent assistance, then please call 1-802-255-4003.

  • By AMT
  • Call for Availability



  • Cast iron construction
  • Stainless steel, semi-open impeller
  • Carbon steel shaft
  • 180°F maximum temperature
  • 56 GPM maximum flow (water)
  • 60ft maximum head (water)
  • Single or three phase, two pole 3450 RPM motor
  • 1/8 to 1 HP options available


The AMT Interchangeable Series are replacement coolant/oil pumps equivalent to units supplied with both domestic and foreign made machine tools. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps are available with a stainless steel impeller for added corrosion/erosion resistance and durability. 1/8 and 1/4 HP models are available in 115/230 VAC, 60 Hz single phase and 230/460 VAC, 60 Hz three phase. Motors are Totally Enclosed with sealed bearings and operate at 3450 RPM.

Pumps feature semi-open impellers that are designed for handling solids and fine contaminants. Immersion type pumps contain a sealless design for pumping abrasives. It can pump liquids down to 2in and is ideally suited for pumping fine contaminants. The suction type pumps are designed with a carbon/ceramic shaft seal. They are self-priming up to 2ft. The suction pumps must be mounted above the liquid.


This product can be used in the following applications: