Select your options below…

{{ option.description }}
"{{ option.noLongerAvailable }}" is no longer a valid option. Please choose from the current set of options.
Need help? Call one of our pump experts at 1-802-255-4003. We’re open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET.
Starting Price: $208.00
Selected Options: + ${{ calcAdditionalCost | formatCurrency }}
${{ calcCost | formatCurrency }} per {{ calcQuantity }} per {{ boxQuantity }}
Configured Part Number: {{ calcPartNumber }}
Alternate Part Numbers: {{pn}}
{{pn}}
{{ calcAvailability }}

Send details on your pump application.
A pump application specialist will contact you within 24 hours with information on the best pumps to suit your application.  If you require urgent assistance, then please call 1-802-255-4003.

Overview

Features

  • 2.3 GPM or 3 GPM options available
  • 1/200 HP motor, 3200 RPM
  • Wet end materials:
    • Polypropylene (Front Housing, Rear Housing, Impeller)
    • Buna N (O-Ring)
    • Carbon/Teflon (Thrust Washer)
    • 316 Stainless Steel (Shaft)
  • 50psi max internal pressure
  • 190°F max liquid temperature
  • 115V or 230 1-phase motor options
  • 6ft power cable included (230V option does not include plug)

Description

The March Pumps Series 1 centrifugal pump is available in a skeleton-type motor and a hermetically encapsulated motor. The hermetically encapsulated model can operate submerged or not submerged. This seal-less magnetic drive pump can generate a maximum flow of up to 3 gallons per minute at 0.25ft and its maximum head is 4.6ft (2psi). Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel wet ends are standard. The motor is a 1-phase 115V or 230V, which can run on either 50 or 60 hertz (please note there are some performance differences between the hertz options). The Series 1 centrifugal pump is capable of handling fresh water, salt water, and mild chemicals.