Select your options below…

{{ option.description }}
"{{ option.noLongerAvailable }}" is no longer a valid option. Please choose from the current set of options.
Need help? Call one of our pump experts at 1-802-255-4003. We’re open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET.
Starting Price: $278.00
Selected Options: + ${{ calcAdditionalCost | formatCurrency }}
${{ calcCost | formatCurrency }} per {{ calcQuantity }} per {{ boxQuantity }}
Configured Part Number: {{ calcPartNumber }}
Alternate Part Numbers: {{pn}}
{{ calcAvailability }}

Send details on your pump application.
A pump application specialist will contact you within 24 hours with information on the best pumps to suit your application.  If you require urgent assistance, then please call 1-802-255-4003.



  • 1/50 and 1/40 HP motors
  • 3450 RPM
  • Wet end materials:
    • Polypropylene (25 and 50psi models)
    • Glass Filled Kynar (75psi models only)
    • Viton
    • Buna N (encapsulated models only)
    • 316 Stainless Steel
    • Ceramic
  • 25, 50, or 75psi max internal pressure
  • 190°F (25 and 50psi) or 200°F (75psi) max liquid temperature
  • 115V or 230 1-phase motor options
  • 6ft power cord for encapsulated motor models
  • 3ft power cord for air and blast cooled models


The March Pumps Series 2 centrifugal pump is available with encapsulated, air cooled, or blast cooled motor options. The hermetically encapsulated model can operate submerged or not submerged, while the epoxy enclosed model can only operate submerged. This seal-less magnetic drive pump can generate a maximum flow of up to 5 gallons per minute at 1ft and its maximum head is 13ft (5.5psi). The motor is a 1-phase 115V or 230V, which can run on either 50 or 60 hertz (please note there are some performance differences between the hertz options). The encapsulated models are capable of handling fresh water, salt water, and mild chemicals, while the air/blast cooled models can handle mildly or highly corrosive chemicals, acids, and solvents.