Grundfos CRE32-6 A-G-A-E-HQQE 3x440-480 60 HZ

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline).

$12,745.20
Effective May 5th, 2025 Grundfos has added a 5% surcharge for all products. The surcharge will appear as a separate line item on the order.
Part Numbers
  • CRE32-6 A-G-A-E-HQQE 3x440-480 60 HZ
  • 92962904
  • CRE 32-6 A-G-A-E-HQQE
Highlights...

Features

  • Rated pump speed: 3521 rpm
  • Rated flow: 159 US gpm
  • Rated head: 429.5 ft
  • Maximum head: 553.5 ft
  • Actual impeller diameter: 4.66 in
  • Stages: 6
  • Impellers: 6
  • Number of reduced-diameter impellers: 0
  • Low NPSH: N
  • Pump orientation: Vertical
  • Shaft seal arrangement: Single
  • Primary shaft seal: HQQE
  • Code for shaft seal: HQQE
  • Approvals: CE,CURUS
  • Approvals for drinking water: NSF/ANSI 61
  • Curve tolerance: ISO9906:2012 3B
  • Pump version: A
  • Model: B
  • Base: Cast iron
  • Impeller: Stainless steel
  • Material code: A
  • Code for rubber: E
  • Bearing: SIC
  • Support bearing: Graflon
  • Maximum ambient temperature: 122 °F
  • Maximum operating pressure: 435.11 psi
  • Max pressure at stated temperature: 435 psi / 250 °F
  • Type of connection: ANSI
  • Size of suction port: 2 1/2 inch
  • Size of outlet port: 2 1/2 inch
  • Pressure rating for connection: PN 40
  • Flange rating inlet: 300 lb
  • Flange size for motor: 284TC
  • Connect code: G
  • Pumped liquid: Water
  • Liquid temperature range: -22 .. 248 °F
  • Selected liquid temperature: 68 °F
  • Density: 62.29 lb/ft³
  • Motor standard: NEMA
  • Motor type: 160B
  • Rated power - P2: 25 HP
  • Power (P2) required by pump: 25 HP
  • Over/undersize motor: Standard motor size
  • Main frequency: 60 Hz
  • Rated voltage: 3 x 440-480 V
  • Service factor: 1.15
  • Rated current: 28.5-26.4 A
  • Cos phi - power factor: 0.94-0.93
  • Rated speed: 360-4000 rpm
  • IE Efficiency class: IE5
  • Motor efficiency at full load: 93.0 %
  • Enclosure class (IEC 34-5): IP55
  • Insulation class (IEC 85): F
  • Built-in motor protection: ELEC
  • Motor Number: 92880232
  • Control panel: Graphical
  • Function Module: FM310 - Advanced
  • Frequency converter: Built-in
  • Pressure sensor: N
  • Terminal box position: 6
  • DOE Pump Energy Index VL: 0.39
  • Net weight: 372 lb
  • Gross weight: 390 lb
  • Shipping volume: 28.9 ft³
  • Config. file no: 92938973
  • Country of origin: US
  • Custom tariff no.: 8413.70.2040
Vertical, multistage centrifugal pump with integrated frequency converter. Pump materials in contact with the liquid are in stainless steel (EN 1.4301)

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via ANSI flanges. The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The operating panel on the motor terminal box features a four-inch TFT display, push-buttons and the Grundfos Eye indicator. The display gives an intuitive and user-friendly interface to all functions. The push-buttons are used to navigate through the menu structure to access pump and performance data on site and enable setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop".