Grundfos 99076093 / CRE3-25 A-FGJ-A-E-HQQE 3x440-480 60HZ

Name: Grundfos 99076093 / CRE3-25 A-FGJ-A-E-HQQE 3x440-480 60HZ
Price: 4643.6 USD
Availability: OutOfStock

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Includes motor.

$4,643.60

Effective May 5th, 2025 Grundfos has added a 5% surcharge for all products. The surcharge will appear as a separate line item on the order.

Part Numbers

CRE3-25 A-FGJ-A-E-HQQE 3x440-480 60HZ
99076093
CRE 3-25 A-FGJ-A-E-HQQE

Highlights...

CRE3-25 A-FGJ-A-E-HQQE 3x440-480 60HZ
By Grundfos
Call for Availability

Features

Rated pump speed: 3476 rpm
Rated flow: 15.8 US gpm
Rated head: 579.7 ft
Maximum head: 785.8 ft
Stages: 25
Impellers: 25
Number of reduced-diameter impellers: 0
Low NPSH: N
Pump orientation: Vertical
Shaft seal arrangement: Single
Primary shaft seal: HQQE
Code for shaft seal: HQQE
Approvals: CE,CURUS
Approvals for drinking water: NSF/ANSI 61
Curve tolerance: ISO9906:2012 3B
Pump version: A
Model: A
Base: Cast iron
Impeller: Stainless steel
Material code: A
Code for rubber: E
Bearing: SIC
Maximum ambient temperature: 122 °F
Maximum operating pressure: 362.59 psi
Max pressure at stated temperature: 363 psi / 250 °F
Type of connection: DIN / ANSI / JIS
Size of inlet connection: DN 25/32
Size of suction port: 1 1/4 inch
Size of outlet connection: DN 25/32
Size of outlet port: 1 1/4 inch
Pressure rating for connection: PN 25
Flange rating inlet: 250 lb
Flange size for motor: 182TC
Connect code: FGJ
Pumped liquid: Water
Liquid temperature range: -4 .. 248 °F
Selected liquid temperature: 68 °F
Density: 62.29 lb/ft³
Motor standard: NEMA
Motor type: 112C
Rated power - P2: 5 HP
Power (P2) required by pump: 5 HP
Over/undersize motor: Standard motor size
Main frequency: 60 Hz
Rated voltage: 3 x 440-480 V
Service factor: 1.15
Rated current: 6.20-5.80 A
Cos phi - power factor: 0.90-0.88
Rated speed: 360-4000 rpm
IE Efficiency class: IE5
Motor efficiency at full load: 92.5 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Built-in motor protection: ELEC
Motor Number: 93079549
Control panel: Graphical
Function Module: FM310 - Advanced
Frequency converter: Built-in
Pressure sensor: N
Terminal box position: 6
Net weight: 121 lb
Gross weight: 139 lb
Shipping volume: 10.1 ft³
Config. file no: 99074100
Country of origin: US
Custom tariff no.: 8413.70.2040

Vertical, multistage centrifugal pump with integrated frequency converter. Pump materials in contact with the liquid are in stainless steel (EN 1.4301)

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The operating panel on the motor terminal box features a four-inch TFT display, push-buttons and the Grundfos Eye indicator. The display gives an intuitive and user-friendly interface to all functions. The push-buttons are used to navigate through the menu structure to access pump and performance data on site and enable setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop".