$2,284.20
  • 24-PUWO0173

Overview

Features

  • F425PP
    • Maximum flow rate: 31 GPM
    • Maximum delivery head: 85ft
    • Maximum temperature: 212°F
    • Viscosity: <1 to 1200 cPs
    • Pump materials: polypropylene
    • 39in immersion depth
    • O-ring material: FKM
  • FEM4070 Electric Motor:
    • IP24 protection rating for enclosure
    • Low voltage protection
    • Housing material: Polyamide
    • Operating temperature range: -4 to 104°F
    • Capacity 500W
    • Voltage: 120V
    • Frequency: 60Hz
    • Internal ventilation

Description

The Flux Pumps F425 series is a liquid saver pump series with grease-lubricated shaft bearing and a mechanically sealed, steel cored inner tube. It has the ability to pump out 99.98% of a 55 gallon drum leaving less than 1% residual. No tilting is necessary to totally empty the drum and there is no loss of medium when taking the pump from drum to drum. There are two switch levers to open and close the foot valve. Operation against a closed valve is possible until the indicated maximum operating temperature.

The Flux Pumps FEM4070 is a compact power electric motor that comes with variable speed adjustment as standard, allowing the user to get the performance they need. The motor has an ergonomic design with an ease-of-use focus: there is a start/stop switch and speed adjustment knobs at the user's fingertips. It offers overload protection in all speed ranges and a low noise level output. Additionally, it is low weight, allowing for safe, one-handed operation.