• 24-PUWO0013
  • By Flux Pumps
  • Usually ships in 4 to 6 weeks



  • F570 FDA 39-inch pump:
    • Stainless steel construction
    • 39in immersion length
    • 12.41 GPM at 900 RPM
    • R52 rotor
    • PTFE stator
    • FDA certified FKMc mechanical seal
  • F457 Electric Motor:
    • Polypropylene housing
    • 800 watt output
    • 9000 RPM nominal speed
    • -4 to 104°F operating temperature
    • 120 volt, 60Hz
    • 16ft cable included
    • CEE 7/17 plug
    • IP24 protection class rated


The Flux Pumps VISCOPOWER F570 progressive cavity pump works on the principle of positive displacement pumping technology. Progressive cavity pumps are distinguished by constant, low pulsation pumping. Depending on the medium and application, flow rates of up to 21.9 GPM and discharge pressures of up to 217 PSIG are achieved. The F457 Electric Motor is a communicator motor that provides up to 800 watts of output.

The medium to be pumped is first fed into a pumping chamber from where it is then displaced upwards. More specifically, it works using a rotating shaft in the pump tube of the progressive cavity pump. This shaft with a rotor at its lower end rotates against a fixed stator. The worm-shaped geometry of the rotor and stator produces cavities in which the medium is then pumped from the suction side at the lower end of the tube upwards to the discharge port.